Friends who are slightly familiar with the waste gas treatment equipment should know that the reason why the waste gas treatment equipment can complete the waste gas treatment operation is inseparable from its multiple parts. So today we Jiangmen waste gas and wastewater treatment equipment company for us to introduce the common waste gas treatment equipment mainly by which components.
Receiving equipment mainly relies on the insolubility between waste gas and VOCs to complete the exhaust gas removal.
For incineration equipment with Ji waste gas, appropriate amount of
Air incinerates the impurities in the waste gas, resulting in a large amount of carbon dioxide and water vapor.
Some gases from the adsorption equipment entering the treatment equipment will be attached to the inside of the equipment due to specific components, and the repeated generation of waste gas in the equipment is completed through the repeated adsorption.
Photocatalysis equipment photocatalysis equipment can convert Ji compounds into nontoxic products. Semiconductors are used as photocatalysts and light energy is used to treat the waste gas in waste gas treatment equipment and recycle the useful resources.
The above is our Jiangmen waste gas and wastewater treatment equipment company introduced to us about the main components of waste gas treatment equipment, hope our introduction can help you understand the relevant Jiangmen environmental protection equipment information.
Source: Jiangmen waste gas and wastewater treatment equipment company http://www.foour.com
How to maintain environmental protection equipment in Jiangmen
1. The user shall carry out the concrete foundation construction according to the basic data provided by our company; the equipment should be installed on the concrete foundation more than 100 mm above the ground; 2. The supporting pipes and valves shall be separately supported and shall not be fixed on the tower equipment; 3. Attention shall be paid to the protection of the equipment during installation, so as not to damage the machine body and exposed parts. When the tower flange is connected
Ten maintenance details of spray tower of Jiangmen Guoqi environmental protection waste gas treatment equipment
Exhaust tower, in the type of exhaust tower, is one of the exhaust towers with long service life. It can deal with almost all mixed gases, so far it is a very practical and cheap product in the treatment of mixed waste gas. It is widely used in chemical industry, light industry, printing and dyeing, medicine, pharmacy, steel, machinery manufacturing, electronics, electroplating, painting, paint and other industries. It mainly deals with tail gas such as sulfuric acid, nitric acid and hydrofurani
Common points for attention in installation of waste gas and wastewater treatment equipment in Jiangmen
1. The user shall carry out the concrete foundation construction, and the installation surface of the foundation shall be on the same horizontal plane, and the allowable error shall not be greater than 5mm. The exhaust pipe of purification tower can be fixed by derrick type, and the foot is fixed with embedded steel plate by welding or embedded bolt. Therefore, the purification tower can not be fixed in general. The matching FRP fan is generally designed as steel frame vibration damping pedestal
Analysis of waste gas treatment equipment including those five factors
Waste gas treatment equipment is also known as waste gas purification equipment. Waste gas treatment refers to the pretreatment of the waste gas produced by industrial sites and factory workshops before discharge, so as to meet the national standards for external emission of waste gas. Today we Jiangmen environmental protection equipment home for you to introduce the analysis of waste gas treatment equipment including which five factors. General waste gas treatment includes organic waste gas tre